pbm1

PBM-30
PBM-30
« 1 од 3 »
APPLICATION

Technical Parameters Units PBM-30 PBM-35 HPBM-50
Shaft diameters
Ømm 30 50 50
Lower Rolls Diameters
Ømm 118 155 162
Top Roll Diameter
Ømm 148 155 152
Hydraulic Power
Ton 8
Working speed
m/min 2-4 4.5 4,5
Motor power
kW 0,7-0,85 1.5 1.1
Machine dimensions (LxWxH)
mm 600x800x1450 750x1000x1400 810x950x1500
Machine weight
kg 220 400 500

 

Technical Parameters PBM-30 PBM-35 HPBM-50
Profile Type Notes Size(mm) Min. Dia. Size(mm) Min. Dia. Size(mm) Min. Dia.
Standard 50×10/20×6 800/300 60×10/40×10 500/400 60×10/20×10 600/300
Standard 80×15/30×6 700/400 100×15/60×10 450/350 100×15/50×10 600/300
Standard 30×30/10×10 900/200 35×35/20×20 900/300 35×35/15×15 600/300
Optional Ø35/Ø10 900/200 Ø35/Ø30 600/400 Ø35/Ø20 600/300
Optional Ø60×1,5/Ø25×1,5 1000/600 Ø70×2/Ø30×2 1000/500 Ø70×2/Ø25×1,5 1200/400
Optional 1 1/2 ” x 2,9 1/4”x 1,8 600/300 2”x2,9 / 1”x2,3 1000/350 2”x2,9/1/2”x2,3 1000/300
Optional 50x30x3/40x20x2 1200/800 70x30x2/50x40x3 1200/1200 70x30x3/30x15x2 1500/400
Optional 40×3/30×2 1200/800 50×3/40×3 1700/600 50×3/20×2 1600/400
Optional 40x40x5/30×30/4 600/300 50x50x5/40x40x5 800/600 50x50x6/30x30x3 600/400
Optional 35x35x5/30x30x4 600/400 50x50x6/30x30x3 1000/500 50x50x6/30x30x3 900/600
Standard 50×6/20×3 600/400 60×7/50×6 700/500 60×7/30×4 800/500
Standard 50×6/20×3 600/400 60×7/50×6 700/500 50×6/30×4 800/500
Standard 50×6/20×3 600/400 60×7/50×6 700/500 60×7/30×4 800/500
Optional UPN 80/UPN 60 1000/700 UPN 80/UPN 30 800/400
Standard UPN 80/UPN 30 1200/800 UPN 80/UPN 30 1200/600
Standard Accessories & Equipment Optional Accessories & Equipment
Steel welded construction frame
Pipe/Tube bending rolls
2 direct driven by gear system (3 powered rolls for HPBM-50)
Profile bending rolls
Top roll hydraulic moveable up-down (for HPBM-50)
Angle bending rolls
Top roll is idle (free turning)
Digital readout
Hardened rolls (and hardened shafts for HPBM-50)
Special lateral angle guide rolls
Rolls shafts are special steel-hardened and ground
Optional stairway bending attachment (for HPBM-50)
Double speed motor (PBM-30)
NC control (for HPBM-50)
Standard rolls
Adjustable guide rolls (PBM-30)
Roll shafts housed by bearings (PBM-35)
Guide rolls (PBM-35 and HPBM-50)
Horizontal and vertical working position
Brake motor equipped for the precision bending (for HPBM-50)
Mobile control panel (for HPBM-50)