| Technical Parameters | Units | HPBM-180 DP | HPBM-150 | HPBM-180 |
|
Shaft diameters
|
Ømm | 180 | 150 | 180 |
|
Roll Diameter
|
Ømm | 580 | 470 | 580 |
|
Working speed
|
m/min | 3-6 | 3-6 | 3-6 |
|
Motor power
|
kW | 30 | 22 | 30 |
|
Machine dimensions (LxWxH)
|
mm | 2400x2600x3200 | 2400x2200x2200 | 3350x2300x2300 |
|
Machine weight
|
kg | 12000 | 8850 | 12000 |
| Technical Parameters | HPBM-180DP | HPBM-150 | HPBM-180 | ||||
| Profile Type | Notes | Size(mm) | Min.Dia. | Size(mm) | Min.Dia. | Size(mm) | Min.Dia. |
|
Standard | 60X10/180X30 | 1000/2000 | 150X35 | 2500 | 180X30 | 2500 |
|
Standard | 80X20/280X60 | 1000/1800 | 270X50 | 1500 | 280X60 | 2000 |
|
Standard | 32X32/110X100 | 1000/1800 | 90X90 | 1500 | 110X110 | 2000 |
|
Optional | Ø35/Ø110 | 1000/1500 | Ø90 | 1800 | Ø110 | 2000 |
|
Optional | Ø 220×5/Ø 60×2 | 8000/1000 | Ø150X4 | 6000 | 200×4 | 8000 |
|
Optional | Ø 8”x8,18/Ø 2”x3,9 | 4000/1000 | Ø6”x7,11 | 3500 | Ø8”x8,18 | 4000 |
|
Optional | 200x100x80 | 5000 | 150x50x5 | 4500 | 200x100x8 | 5000 |
|
Optional | 150×8 | 4500 | 120×6 | 4000 | 150×8 | 4500 |
|
Optional | 180x180x18/60x60x3 | 1000/2000 | 150x150x18 | 2200 | 180x180x20 | 2500 |
|
Optional | 180x180x15/50x50x5 | 1000/2500 | 150x150x15 | 3000 | 180x180x15 | 3000 |
|
Standard | 160×20 | 2000 | 150×15 | 2000 | 160×20 | 2500 |
|
Standard | 150×20 | 2500 | 130×15 | 2500 | 150×20 | 3000 |
|
Optional | 160×20 | 2000 | 150×15 | 2000 | 160×20 | 2500 |
|
Standard | UPN 80/UPN 350 | 1000/2000 | UPN 280 | 2000 | UPN 350 | 2500 |
|
Standard | UPN 65/UPN 350 | 1000/2000 | UPN 280 | 3000 | UPN 350 | 3000 |
|
Optional | IPN 360 | 3000 | IPN 300 | 3000 | IPN 360 | 3000 |
|
Optional | HEB 100/HEB 200 | 1500/2500 | HEB 180 | 3000 | HEB 200 | 2500 |
|
Optional | UPN 100/UPN 220 | 4000/8000 | UPN 160 | 6000 | UPN 220 | 8000 |
|
Optional | IPN 100/IPN 220 | 3500/4500 | IPN 180 | 4500 | IPN 220 | 5000 |
|
Optional | HEB 100/HEB 160 | 3000/4000 | HEB 120 | 4000 | HEB 160 | 5000 |
| Standard Accessories & Equipment | Optional Accessories & Equipment |
|
Steel construction welded frame
|
All special bending rolls and HEB, IPN and UPN beam attachments
|
|
3 Rolls are powered by hydromotor and planetary gearbox
|
Infinitively variable speed adjustment
|
|
Hardened and ground shafts made of high tensile special steel
|
Automation with NC control
|
|
Rolls are hardened and ground
|
|
|
Horizontal and vertical working position (for HPBM-180 DP)
|
|
|
Only horizontal working position (for HPBM-150 and HPBM-180)
|
|
|
Hardened standard rolls
|
|
|
Mobile control panel
|
|
|
3 Axis hydraulic lateral angle guide rolls
|
|
|
Digital Read-Out
|
|
|
Two speed working system (for HPBM-150 and HPBM-180)
|
