| Technical Parameters | Units | PBM-30 | PBM-35 | HPBM-50 |
|
Shaft diameters
|
Ømm | 30 | 50 | 50 |
|
Lower Rolls Diameters
|
Ømm | 118 | 155 | 162 |
|
Top Roll Diameter
|
Ømm | 148 | 155 | 152 |
|
Hydraulic Power
|
Ton | 8 | ||
|
Working speed
|
m/min | 2-4 | 4.5 | 4,5 |
|
Motor power
|
kW | 0,7-0,85 | 1.5 | 1.1 |
|
Machine dimensions (LxWxH)
|
mm | 600x800x1450 | 750x1000x1400 | 810x950x1500 |
|
Machine weight
|
kg | 220 | 400 | 500 |
| Technical Parameters | PBM-30 | PBM-35 | HPBM-50 | ||||
| Profile Type | Notes | Size(mm) | Min. Dia. | Size(mm) | Min. Dia. | Size(mm) | Min. Dia. |
|
|
Standard | 50×10/20×6 | 800/300 | 60×10/40×10 | 500/400 | 60×10/20×10 | 600/300 |
|
|
Standard | 80×15/30×6 | 700/400 | 100×15/60×10 | 450/350 | 100×15/50×10 | 600/300 |
|
Standard | 30×30/10×10 | 900/200 | 35×35/20×20 | 900/300 | 35×35/15×15 | 600/300 |
|
Optional | Ø35/Ø10 | 900/200 | Ø35/Ø30 | 600/400 | Ø35/Ø20 | 600/300 |
|
Optional | Ø60×1,5/Ø25×1,5 | 1000/600 | Ø70×2/Ø30×2 | 1000/500 | Ø70×2/Ø25×1,5 | 1200/400 |
|
Optional | 1 1/2 ” x 2,9 1/4”x 1,8 | 600/300 | 2”x2,9 / 1”x2,3 | 1000/350 | 2”x2,9/1/2”x2,3 | 1000/300 |
|
Optional | 50x30x3/40x20x2 | 1200/800 | 70x30x2/50x40x3 | 1200/1200 | 70x30x3/30x15x2 | 1500/400 |
|
Optional | 40×3/30×2 | 1200/800 | 50×3/40×3 | 1700/600 | 50×3/20×2 | 1600/400 |
|
Optional | 40x40x5/30×30/4 | 600/300 | 50x50x5/40x40x5 | 800/600 | 50x50x6/30x30x3 | 600/400 |
|
Optional | 35x35x5/30x30x4 | 600/400 | 50x50x6/30x30x3 | 1000/500 | 50x50x6/30x30x3 | 900/600 |
|
Standard | 50×6/20×3 | 600/400 | 60×7/50×6 | 700/500 | 60×7/30×4 | 800/500 |
|
Standard | 50×6/20×3 | 600/400 | 60×7/50×6 | 700/500 | 50×6/30×4 | 800/500 |
|
Standard | 50×6/20×3 | 600/400 | 60×7/50×6 | 700/500 | 60×7/30×4 | 800/500 |
|
Optional | UPN 80/UPN 60 | 1000/700 | UPN 80/UPN 30 | 800/400 | ||
|
Standard | UPN 80/UPN 30 | 1200/800 | UPN 80/UPN 30 | 1200/600 | ||
| Standard Accessories & Equipment | Optional Accessories & Equipment |
|
Steel welded construction frame
|
Pipe/Tube bending rolls
|
|
2 direct driven by gear system (3 powered rolls for HPBM-50)
|
Profile bending rolls
|
|
Top roll hydraulic moveable up-down (for HPBM-50)
|
Angle bending rolls
|
|
Top roll is idle (free turning)
|
Digital readout
|
|
Hardened rolls (and hardened shafts for HPBM-50)
|
Special lateral angle guide rolls
|
|
Rolls shafts are special steel-hardened and ground
|
Optional stairway bending attachment (for HPBM-50)
|
|
Double speed motor (PBM-30)
|
NC control (for HPBM-50)
|
|
Standard rolls
|
|
|
Adjustable guide rolls (PBM-30)
|
|
|
Roll shafts housed by bearings (PBM-35)
|
|
|
Guide rolls (PBM-35 and HPBM-50)
|
|
|
Horizontal and vertical working position
|
|
|
Brake motor equipped for the precision bending (for HPBM-50)
|
|
|
Mobile control panel (for HPBM-50)
|
